Power supply: |
about 12vac or vdc @500ma
with 2.1x5mm coax plug (supplied)
|
Amplifier connection: |
|
4 wire from each of 2 sources (thus A/B)
is connected through a relay to an internal bus
that any one of eight speakers can be connected to.
If A amp is connected to bus
then B amp is totally isolated from any speaker or A amp.
If B is selected then visa versa.
|
|
Serial: |
RS232 requires db9 pin male/female cable
DB9 female DB9 male
pin 2 to pin 2
pin 3 to pin 3
pin 5 to pin 5
|
IR:
|
UP TO 256 DIFFERENT TRANSMITTERS WITH UP TO 256 KEYS
(HEXADECIMAL 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F)
XX=TRANSMITTER ADDRESS
YY=KEY CODE
ALL RELAYS = 1 TO 8
|
IR Default selection (run "Config AB8SS" to change)
XX YY XX YY
IR ALL RELAYS ON= 01 02 OFF= 01 03
IR A/B RELAY B = 01 06 A = 01 07
IR #1 RELAY ON= 01 01 OFF= 01 14
IR #2 RELAY ON= 01 00 OFF= 01 05
IR #3 RELAY ON= 01 04 OFF= 01 09
IR #4 RELAY ON= 01 08 OFF= 01 0D
IR #5 RELAY ON= 01 0C OFF= 01 11
IR #6 RELAY ON= 01 10 OFF= 01 19
IR #7 RELAY ON= 01 18 OFF= 01 1D
IR #8 RELAY ON= 01 1C OFF= 01 15
X10: |
|
X10 Default codes (run "Config AB8SS" to change)
X10 ALL RELAYS HOUSE= E UNIT= 1 ON= ALL OUTPUTS ON OFF= ALL OUTPUTS OFF
X10 A/B RELAY HOUSE= E UNIT= 2 ON= B INPUT SELECT OFF= A INPUT SELECT
X10 #1 RELAY HOUSE= F UNIT= 1 ON=#1 OUTPUT ON OFF= #1 OUTPUT OFF
X10 #2 RELAY HOUSE= F UNIT= 2 ON=#2 OUTPUT ON OFF= #2 OUTPUT OFF
X10 #3 RELAY HOUSE= F UNIT= 3 ON=#3 OUTPUT ON OFF= #3 OUTPUT OFF
X10 #4 RELAY HOUSE= F UNIT= 4 ON=#4 OUTPUT ON OFF= #4 OUTPUT OFF
X10 #5 RELAY HOUSE= F UNIT= 5 ON=#5 OUTPUT ON OFF= #5 OUTPUT OFF
X10 #6 RELAY HOUSE= F UNIT= 6 ON=#6 OUTPUT ON OFF= #6 OUTPUT OFF
X10 #7 RELAY HOUSE= F UNIT= 7 ON=#7 OUTPUT ON OFF= #7 OUTPUT OFF
X10 #8 RELAY HOUSE= F UNIT= 8 ON=#8 OUTPUT ON OFF= #8 OUTPUT OFF
|
X10 control requires optional TW-523 and
modular cable (6x4) required (inverse)
|
